Hi Dave, I found the escape codes for changing color of characters when using a VT100. I agree with you that BOLD, BLINKING , and UNDERLINE may not be possible, but it would be nice to add color selection. The codes that I found are:
ESC[3(0-7)m for the color of the character, where the second number can be 0=black,1=red,2=green,3=yellow,4=blue,5=magenta,6=cyan,7=white. For the background the code is ESC[4(0-7)m with the second number having the same color sequence. I was able to check the escape codes on the TeraTerm which is setup for VT100. I do not understand the spin programs so I am not sure how to construct the case situation for the "m" modification of the color. If I can help that would be great. Thanks, Harold On Friday, March 13, 2015 at 11:07:38 AM UTC-4, [email protected] wrote: > Hi all, > > Just finished the propeller console IO board and I have it running with > the 8080A CPU board with Josh's rev 2.4 ROM. I downloaded the firmware to > run the screen and keyboard as a VT100 terminal. That works pretty well but > some of the ESC codes for screen control don't work. Has anyone done any > more programming through Parallax on the .spin programs? > > Just curious. > > Thanks, > Harold > -- You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
