I prefer PuTTY, myself. Try it! It's mainly an SSH client, but it works well with serial as well. If you want XMODEM or other file transfer functions, you might look into ExtraPuTTY, which is a fork with additions such as those.
- Dave > On Mar 18, 2015, at 16:19, "Bob Bell" <[email protected]> wrote: > > Thanks, David. > I have downloaded Tera Term and will check it out. > > Bob Bell > > > From: [email protected] [mailto:[email protected]] On > Behalf Of David Fry > Sent: Wednesday, March 18, 2015 3:33 AM > To: [email protected] > Subject: [N8VEM-S100:6564] Re: Wordstar questions > > Hi Bob, > > not sure if it will help you but you could try 'Tera Term', it was popular > back in the days when I was playing with cisco switches. > > http://ttssh2.sourceforge.jp/index.html.en > > Regards > > David Fry > > On Wednesday, March 18, 2015 at 3:10:09 AM UTC, Bob Bell wrote: > I still use Wordstar v3 for occasional, quick edits on files directly on my > S-100 CP/M v2.2 machines. Up until today, I have been using a Fulcrum > Computer IVI S-100-based video terminal that emulates a Soroc IQ-120, and a > Heath H19. Both of these terminals have installation/configuration options > for them in the Wordstar Install program. However, I am now using my new > CP/M machine in an area where I don't have the Heath H19, and its not > conducive to moving it. So, I have the computer connected to the serial port > on an old Win98 machine running Hyperterminal. (I could also run it on a > Win7 box with a serial port.) However, Hyperterminal runs an ANSI/VT/100 > emulation and I cannot tell which, if any, of the terminals that are possible > to setup in Wordstar will work with Hyperterminal. Does anyone know which > one to use? Here is the list from Wordstar: > > Beehive 150 / Cromemco 3100 > Hewlett Packard 2621 > Perkin-Elmer 550 > Infoton I-100 > Microterm ACT IV or V > Visual 200 > Flashwriter I or II > Televideo 912, 920 or 950 > ADDS Regent 20, 25, 40, 45, 60, 65 or Viewpoint > Intertec Superbrain > Lear-Siegler ADM-3A or ADM-31 > Hazeltine 1500 or 1420 > Soroc IQ-120 or 140 > Compucolor 8001G > TEC model 571 > Heath/Zenith H89/H19 > > Wordstar can also be customized with control codes and escape sequences. > However, the manual I have is for Wordstar v3.3, and I cannot figure out how > to get into the customization section. If I did, I know the VT-100 codes to > put in. So, if you would have any insight into how to customize Wordstar, I > would be grateful to hear from you too. > > Finally, if I could find a Windows 7 compatible terminal emulation program > that will work like one of the terminals in the list above, through a com > port, I could use that instead of Hyperterminal. Do you have one to > recommend? > > Thanks in advance for all your help. > > Bob Bell > > -- > You received this message because you are subscribed to the Google Groups > "N8VEM-S100" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- > You received this message because you are subscribed to the Google Groups > "N8VEM-S100" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
