I have the HP display boards Tom. $10. I should be able to ship for $2 in the US.
Thanks, Todd * Tom Lafleur <[email protected]> [150320 11:31]: > I'm interested in the HP version of the board if you still have one.... > > On Thu, Mar 19, 2015 at 10:32 AM, Ian McLaughlin <[email protected]> wrote: > > > John, > > > > Do you also have any of the daughter boards available? > > > > Ian > > > > On Mar 19, 2015, at 10:30 AM, John Monahan <[email protected]> wrote: > > > > That was fast! > > John > > > > *From:* [email protected] [mailto:[email protected] > > <[email protected]>] *On Behalf Of *Ian McLaughlin > > *Sent:* Thursday, March 19, 2015 10:29 AM > > *To:* [email protected] > > *Subject:* Re: [N8VEM-S100:6578] A V3 version of the S100 Bus System > > Monitor Board. > > > > John, > > > > Please put me down for 1 board. > > > > Thanks! > > > > Ian > > > > > > On Mar 19, 2015, at 10:26 AM, monahanz <[email protected]> wrote: > > > > > > > > > > > > > > Now that the S100 bus XVGA video board ( > > http://s100computers.com/My%20System%20Pages/VGA%20Board/VGA%20Board.htm) > > has gone out to everybody, I would like to announce our next board… > > > > > > > > It’s a V3 version of our tried and true SMB (System monitor Board). The > > original board is described here:- > > > > > > > > > > http://s100computers.com/My%20System%20Pages/SMB%20Board/S100%20Bus%20SMB.htm > > > > > > > > The following changes/updates have been made to the board:- > > > > > > > > - The was a minor error on the above V2 board (pin 5 of U32), this is > > now corrected. > > > > > > - There was a report of the TMA 0-3 switch circuit was not working > > reliably with the 80386 board at high speed, this circuit has now been > > completely replaced/simplified with a single GAL. > > > > > > - An Intersil ICM7216D chip has been added along with 3 new Digital > > displays to continuously display the frequency of the bus master clock > > speed (PHI) in MHz. > > > > > > - A circuit and LED bar was added to continuously display the bit > > pattern of a user defined output port. (default, LED Diagnostic Port > > 05H). > > > > > > - A circuit was added to trigger an interrupt if the S100 bus ERROR* > > signal (pin 98) is activated. > > > > > > - A series of jumpers was added to easily attach a logic probe cable > > (such as a USBee or Saleae unit) for hardware debugging. > > > > > > - The LM323K 5Volt, 3Amp regulator can be replaced (in the same > > footprint/space) with a Pololu 5 Volt , 2.5 Amp D24V25 Switching > > regulator. > > > > > > - Almost all chips from the V2 board can be re-used on the V3 board. > > Only the ICM7216D, 3 Digital displays and GAL 22V10 are new. > > > > > > > > Please see the bottom of the above page for more information. > > > > > > > > I will be sending off an order for final bare boards in the next few > > days. If you would like one or more boards please let me know (preferably > > by e-mail). The usual arrangements ~$15/board + postage WHEN you get the > > board via PayPal. > > > > > > > > John > > > > > > > > > > > > > > > > > > > > -- > > You received this message because you are subscribed to the Google Groups > > "N8VEM-S100" group. > > To unsubscribe from this group and stop receiving emails from it, send an > > email to [email protected]. > > For more options, visit https://groups.google.com/d/optout. > > --- > > > > Filter service subscribers can train this email as spam or not-spam here > > <http://my.email-as.net/spamham/cgi-bin/learn.pl?messageid=0C8A9724CE5D11E4A820247293ED0201> > > > > > > -- > > You received this message because you are subscribed to the Google Groups > > "N8VEM-S100" group. > > To unsubscribe from this group and stop receiving emails from it, send an > > email to [email protected]. > > For more options, visit https://groups.google.com/d/optout. > > --- > > > > Filter service subscribers can train this email as spam or not-spam here > > <http://my.email-as.net/spamham/cgi-bin/learn.pl?messageid=AE2DA382CE5D11E4A0496C8093ED0201> > > > > -- > > You received this message because you are subscribed to the Google Groups > > "N8VEM-S100" group. > > To unsubscribe from this group and stop receiving emails from it, send an > > email to [email protected]. > > For more options, visit https://groups.google.com/d/optout. > > > > > > -- > > You received this message because you are subscribed to the Google Groups > > "N8VEM-S100" group. > > To unsubscribe from this group and stop receiving emails from it, send an > > email to [email protected]. > > For more options, visit https://groups.google.com/d/optout. > > > > > > -- > > ~~ _/) ~~~~ _/) ~~~~ _/) ~~~~ _/) ~~ > > Tom Lafleur > > -- > You received this message because you are subscribed to the Google Groups > "N8VEM-S100" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
