John, I'd like three please. Thank you, Todd On Fri, Mar 20, 2015 at 11:37 AM, Todd Goodman <[email protected]> wrote: > I have the HP display boards Tom. $10. I should be able to ship for $2 > in the US. > > Thanks, > > Todd > > * Tom Lafleur <[email protected]> [150320 11:31]: >> I'm interested in the HP version of the board if you still have one.... >> >> On Thu, Mar 19, 2015 at 10:32 AM, Ian McLaughlin <[email protected]> wrote: >> >> > John, >> > >> > Do you also have any of the daughter boards available? >> > >> > Ian >> > >> > On Mar 19, 2015, at 10:30 AM, John Monahan <[email protected]> wrote: >> > >> > That was fast! >> > John >> > >> > *From:* [email protected] [mailto:[email protected] >> > <[email protected]>] *On Behalf Of *Ian McLaughlin >> > *Sent:* Thursday, March 19, 2015 10:29 AM >> > *To:* [email protected] >> > *Subject:* Re: [N8VEM-S100:6578] A V3 version of the S100 Bus System >> > Monitor Board. >> > >> > John, >> > >> > Please put me down for 1 board. >> > >> > Thanks! >> > >> > Ian >> > >> > >> > On Mar 19, 2015, at 10:26 AM, monahanz <[email protected]> wrote: >> > >> > >> > >> > >> > >> > >> > Now that the S100 bus XVGA video board ( >> > http://s100computers.com/My%20System%20Pages/VGA%20Board/VGA%20Board.htm) >> > has gone out to everybody, I would like to announce our next board… >> > >> > >> > >> > It’s a V3 version of our tried and true SMB (System monitor Board). The >> > original board is described here:- >> > >> > >> > >> > >> > http://s100computers.com/My%20System%20Pages/SMB%20Board/S100%20Bus%20SMB.htm >> > >> > >> > >> > The following changes/updates have been made to the board:- >> > >> > >> > >> > - The was a minor error on the above V2 board (pin 5 of U32), this is >> > now corrected. >> > >> > >> > - There was a report of the TMA 0-3 switch circuit was not working >> > reliably with the 80386 board at high speed, this circuit has now been >> > completely replaced/simplified with a single GAL. >> > >> > >> > - An Intersil ICM7216D chip has been added along with 3 new Digital >> > displays to continuously display the frequency of the bus master clock >> > speed (PHI) in MHz. >> > >> > >> > - A circuit and LED bar was added to continuously display the bit >> > pattern of a user defined output port. (default, LED Diagnostic Port >> > 05H). >> > >> > >> > - A circuit was added to trigger an interrupt if the S100 bus ERROR* >> > signal (pin 98) is activated. >> > >> > >> > - A series of jumpers was added to easily attach a logic probe cable >> > (such as a USBee or Saleae unit) for hardware debugging. >> > >> > >> > - The LM323K 5Volt, 3Amp regulator can be replaced (in the same >> > footprint/space) with a Pololu 5 Volt , 2.5 Amp D24V25 Switching >> > regulator. >> > >> > >> > - Almost all chips from the V2 board can be re-used on the V3 board. >> > Only the ICM7216D, 3 Digital displays and GAL 22V10 are new. >> > >> > >> > >> > Please see the bottom of the above page for more information. >> > >> > >> > >> > I will be sending off an order for final bare boards in the next few >> > days. If you would like one or more boards please let me know (preferably >> > by e-mail). The usual arrangements ~$15/board + postage WHEN you get the >> > board via PayPal. >> > >> > >> > >> > John >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > -- >> > You received this message because you are subscribed to the Google Groups >> > "N8VEM-S100" group. >> > To unsubscribe from this group and stop receiving emails from it, send an >> > email to [email protected]. >> > For more options, visit https://groups.google.com/d/optout. >> > --- >> > >> > Filter service subscribers can train this email as spam or not-spam here >> > <http://my.email-as.net/spamham/cgi-bin/learn.pl?messageid=0C8A9724CE5D11E4A820247293ED0201> >> > >> > >> > -- >> > You received this message because you are subscribed to the Google Groups >> > "N8VEM-S100" group. >> > To unsubscribe from this group and stop receiving emails from it, send an >> > email to [email protected]. >> > For more options, visit https://groups.google.com/d/optout. >> > --- >> > >> > Filter service subscribers can train this email as spam or not-spam here >> > <http://my.email-as.net/spamham/cgi-bin/learn.pl?messageid=AE2DA382CE5D11E4A0496C8093ED0201> >> > >> > -- >> > You received this message because you are subscribed to the Google Groups >> > "N8VEM-S100" group. >> > To unsubscribe from this group and stop receiving emails from it, send an >> > email to [email protected]. >> > For more options, visit https://groups.google.com/d/optout. >> > >> > >> > -- >> > You received this message because you are subscribed to the Google Groups >> > "N8VEM-S100" group. >> > To unsubscribe from this group and stop receiving emails from it, send an >> > email to [email protected]. >> > For more options, visit https://groups.google.com/d/optout. >> > >> >> >> >> -- >> >> ~~ _/) ~~~~ _/) ~~~~ _/) ~~~~ _/) ~~ >> >> Tom Lafleur >> >> -- >> You received this message because you are subscribed to the Google Groups >> "N8VEM-S100" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "N8VEM-S100" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout.
-- You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
