John, He's talking about the Xi8088 board. An ISA bus card designed by Sergey.
Todd On Mon, Mar 30, 2015 at 8:28 PM, John Monahan <[email protected]> wrote: > No the S100 8088 cpu board is not a sbc. You need a number of other boards. > John > > John Monahan ([email protected]) > > On Mar 30, 2015 11:12 AM, "Andy Smout" <[email protected]> wrote: >> >> I have a fluke 9020a troubleshooter with a 8088 pod and I am looking for a >> 8088 sbc or minimal system to do some testing with the fluke, in prep for >> doing some arcade pcb repairs etc. >> I happened on the n8vem site whilst researching diy sbc's and the 8088 s10 >> board looked like a possible candidate. >> Could this board be run as a standalone SBC ? without the s100 bus ? >> or is there an alternative 8088 s100 pcb that could ? >> >> also is the xi8088 covered in this group too ? (I have seen some >> references to it here) >> the xi8088 looks like I could populate the minimum required components to >> achieve a simple 8088 sbc and I am wondering if there are any pcbs still >> available ? >> >> apologies for the dumb questions :) >> >> oh, and along the s100 lines, when I was studying CAd/CAM I was using a >> machine that iirc was a multi pcb system with turbo dos os (multi user >> system) that was used to do data transfers between the McDonald douglas unix >> machines (the drafting machines) and the CAM controllers. does anyone >> remember such a system ? after reading up on this site, I now realise it >> must have been an s100 system of some sort and it was relatively ancient >> (and always crashing too). >> >> cheers, Andy >> >> -- >> You received this message because you are subscribed to the Google Groups >> "N8VEM-S100" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "N8VEM-S100" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
