Jeff a BOM would be nice, particularly if you have item to do a vendor catalogue #’s. just send me a pdf, I will add it to the bottom of the web page
John From: [email protected] [mailto:[email protected]] On Behalf Of Jeff Albrecht Sent: Saturday, May 30, 2015 1:59 PM To: [email protected] Subject: Re: [N8VEM-S100:7128] S100 extender board I completed and tested two. John if you like I began a BOM. Made it easier for me to gather the parts pre construction. Also I made a detail of the edge connector fingers to the PCB solder pads pre soldering. Do you have a source repository for the extender? I could branch it and send a pull request. I'll add more detail to the BOM if you like I could add the Digi-Key part numbers that you have in the article detail. Don't know where and what size Google puts this image. Let me know if you want the original 4020x628 Thanks for publishing the extender. <https://lh3.googleusercontent.com/-myjMiaUfLSY/VWojMy4i41I/AAAAAAAAA_s/AMSkRWCHA9o/s1600/Edge%2BConnector%2BFingers.png> Value Quanity Part 10 1 R10 180 3 R1, R6, R8, R9 390 1 R15 470 2 R11, R12 1000 1 R13 4700 1 R2 6800 1 R14 20000 2 R3, R4 0 R5, R7 0.1uF 3 C7, C8, C17 10uF 2 C18, C19 0.33uF 1 C1 0.1uf 1 C3 -- You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
