Estou tentando rodar este
daemon em uma estação, mas aparentemente ele não está rodando.
Segue o
NSC.INI:
====================================================================================================
[modules]
;# NSCLIENT++
MODULES
;# A list with DLLs to load at startup.
; You will need
to enable some of these for NSClient++ to work.
; ! ! ! ! ! ! ! ! ! ! ! !
! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! !
;
*
*
; * N O T I C E ! ! ! - Y O U H A V E T
O E D I T T H I S *
;
*
*
; ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! !
!
FileLogger.dll
CheckSystem.dll
CheckDisk.dll
NSClientListener.dll
NRPEListener.dll
SysTray.dll
CheckEventLog.dll
;CheckHelpers.dll
;
;
CheckWMI IS AN EXTREM EARLY IDEA SO DONT USE FOR PRODUCTION
ENVIROMNEMTS!
;CheckWMI.dll
;
; RemoteConfiguration IS AN EXTREM
EARLY IDEA SO DONT USE FOR PRODUCTION
ENVIROMNEMTS!
;RemoteConfiguration.dll
[Settings]
;# OBFUSCATED
PASSWORD
; This is the same as the password option but here you can
store the password in an obfuscated manner.
; *NOTICE* obfuscation
is *NOT* the same as encryption, someone with access to this file can still
figure out the
; password. Its just a bit harder to do it at first
glance.
;obfuscated_password=Jw0KAUUdXlAAUwASDAAB
;
;#
PASSWORD
; This is the password (-s) that is required to access
NSClient remotely. If you leave this blank everyone will be able to access
the daemon remotly.
;password=secret-password
;
;# ALLOWED HOST
ADDRESSES
; This is a comma-delimited list of IP address of hosts
that are allowed to talk to the all daemons.
; If leave this blank
anyone can access the deamon remotly (NSClient still requires a valid
password).
;allowed_hosts=127.0.0.1
allowed_hosts= 10.221.40.22
;
;# USE
THIS FILE
; Use the INI file as opposed to the registry if this is
0 and the use_reg in the registry is set to 1
; the registry will
be used instead.
use_file=1
[log]
;# LOG
DEBUG
; Set to 1 if you want debug message printed in the log file
(debug messages are always printed to stdout when run with
-test)
debug=1
;
;# LOG FILE
; The file to print log
statements to
file=NSC.log
;
;# LOG DATE MASK
; The format
to for the date/time part of the log entry written to
file.
;date_mask=%Y-%m-%d %H:%M:%S
[NSClient]
;#
ALLOWED HOST ADDRESSES
; This is a comma-delimited list of IP
address of hosts that are allowed to talk to NSClient deamon.
; If
you leave this blank the global version will be used
instead.
allowed_hosts=10.221.40.22
;
;#
NSCLIENT PORT NUMBER
; This is the port the NSClientListener.dll
will listen to.
port=12489
;
;# BIND TO ADDRESS
; Allows
you to bind server to a specific local address. This has to be a dotted ip
adress not a hostname.
; Leaving this blank will bind to all
avalible IP adresses.
;bind_to_address=
[Check System]
;#
CPU BUFFER SIZE
; Can be anything ranging from 1s (for 1 second) to
10w for 10 weeks. Notice that a larger buffer will waste memory
;
so don't use a larger buffer then you need (ie. the longest check you do
+1).
;CPUBufferSize=1h
;
;# CHECK RESOLUTION
; The
resolution to check values (currently only CPU).
; The value is
entered in 1/10:th of a second and the default is 10 (which means ones every
second)
;CheckResolution=10
[NRPE]
;# NRPE PORT
NUMBER
; This is the port the NRPEListener.dll will listen
to.
port=5666
;
;# COMMAND TIMEOUT
; This specifies the
maximum number of seconds that the NRPE daemon will allow plug-ins to finish
executing before killing them off.
;command_timeout=60
;
;# COMMAND
ARGUMENT PROCESSING
; This option determines whether or not the
NRPE daemon will allow clients to specify arguments to commands that are
executed.
allow_arguments=1
;
;# COMMAND ALLOW NASTY META
CHARS
; This option determines whether or not the NRPE daemon will
allow clients to specify nasty (as in |`&><'"\[]{}) characters in
arguments.
allow_nasty_meta_chars=1
;
;# USE SSL SOCKET
;
This option controls if SSL should be used on the
socket.
;use_ssl=1
;
;# BIND TO ADDRESS
; Allows you to
bind server to a specific local address. This has to be a dotted ip adress
not a hostname.
; Leaving this blank will bind to all avalible IP
adresses.
; bind_to_address=
;
;# ALLOWED HOST ADDRESSES
;
This is a comma-delimited list of IP address of hosts that are allowed to
talk to NRPE deamon.
; If you leave this blank the global version
will be used instead.
;allowed_hosts=
[NRPE Handlers]
;#
COMMAND DEFINITIONS
;# Command definitions that this daemon will
run.
;# Can be either NRPE
syntax:
;command[check_users]=/usr/local/nagios/libexec/check_users -w 5
-c 10
;# Or simplified syntax:
;test=c:\test.bat foo $ARG1$
bar
;check_disk1=/usr/local/nagios/libexec/check_disk -w 5 -c 10
;# Or
even loopback (inject) syntax (to run internal commands)
;# This is a way
to run "NSClient" commands and other internal module commands such as check
eventlog etc.
;check_cpu=inject checkCPU warn=80 crit=90 5 10
15
;check_eventlog=inject CheckEventLog Application
warn.require.eventType=error warn.require.eventType=warning
critical.require.eventType=error critical.exclude.eventType=info
truncate=1024 descriptions
;check_disk_c=inject CheckFileSize ShowAll
MaxWarn=1024M MaxCrit=4096M File:WIN=c:\ATI\*.*
;# But be careful:
;
dont_check=inject dont_check This will "loop forever" so be careful with the
inject command...
;# Check some escapings...
; check_escape=inject
CheckFileSize ShowAll MaxWarn=1024M MaxCrit=4096M "File: foo \"
WIN=c:\\WINDOWS\\*.*"
====================================================================================================
Se alguém puder ajudar ou
indicar alguma documentação, ficaria muito grato.
Sem
mais,
