> I just deployed one of these using nagios. You will need to use SNMP. > There is a secret setting that they just put in the most recent version of > firmware that allows the temp and humidity output to be displayed as xx vs > xxxx (so you have the device say 67 degrees instead of 6789 degrees). That > you need to do by telnetting to a port (I want to say 9999 but I can > check) and changing a few settings. Depending on where you have the > sensors plugged in, the OID that you will need to hit will change. I have > a RoomAlert 11E and can tell you more on how I have it set up if you are > interested. Also, I added a -u (units) to the end of my check command to > so that the output in the nagios GUI would say degrees or relative > humidity. Let me know if you need my check commands and help with the > OIDs. Good luck. -Seth
Boy, I'd love to know what that secret setting is. Until now, I've been using hacks like: -u "x 0.01 degrees F" so that the output was human-readable. If you could send your check commands to the list, that'd be very much appreciated! Benny -- "It makes me want to crawl back up the line and hit them in the face with a spade." -- Loren Wilton ------------------------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/ _______________________________________________ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
