Does the Nagios server have 161 into the firewall allowed? ---- Larry Low 4150 N Drinkwater Blvd., 5th Floor Scottsdale, AZ 85251 Office: 480.385.7045 E-mail: [EMAIL PROTECTED]'
Telesphere Networks, Inc > -----Original Message----- > From: Brian Loe [mailto:[EMAIL PROTECTED] > Sent: Thursday, February 14, 2008 1:30 PM > To: Larry Low > Cc: Nagios Users Mailinglist > Subject: Re: [Nagios-users] snmp v3 on 3600 > > On Thu, Feb 14, 2008 at 10:09 AM, Larry Low <[EMAIL PROTECTED]> > wrote: > > Here is a simple authNoPriv setup. The snmp-server user will not > show up on > > the config but is stored in a private config in flash. 'show snmp > user' can > > be used to get info. > > > > snmp-server group <group name> v3 auth access <acl list> > > snmp-server user <user> <group> v3 auth md5 <password> > > > > You will probably want to do more to lock down access as RW is > available > > with those commands. > > I've done this with no luck... chasing a firewall issue as I'm only > getting timeouts. > > Anything not obvious about how the firewall should be configured (out > of my control in this environment)? This is an ISP router and the > firewall has UDP 161 opened up going out from Nagios server to the > router only. ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Nagios-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
