On Thu, Feb 14, 2008 at 10:09 AM, Larry Low <[EMAIL PROTECTED]> wrote: > Here is a simple authNoPriv setup. The snmp-server user will not show up on > the config but is stored in a private config in flash. 'show snmp user' can > be used to get info. > > snmp-server group <group name> v3 auth access <acl list> > snmp-server user <user> <group> v3 auth md5 <password> > > You will probably want to do more to lock down access as RW is available > with those commands.
I've done this with no luck... chasing a firewall issue as I'm only getting timeouts. Anything not obvious about how the firewall should be configured (out of my control in this environment)? This is an ISP router and the firewall has UDP 161 opened up going out from Nagios server to the router only. ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Nagios-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
