I wouldn't call it shaming the vendor. There are a ton of platforms out there 
by nearly every vendor that can't accommodate modern table sizes. 




----- 
Mike Hammett 
Intelligent Computing Solutions 
http://www.ics-il.com 

Midwest-IX 
http://www.midwest-ix.com 

----- Original Message -----

From: "Baldur Norddahl" <baldur.nordd...@gmail.com> 
To: nanog@nanog.org 
Sent: Wednesday, May 15, 2019 1:47:24 PM 
Subject: Re: BGP prefix filter list 


My purpose is not to shame the vendor, but anyway these are ZTE M6000. We are 
currently planing to implement Juniper MX204 instead, but not because of this 
incident. We just ran out of bandwidth and brand new MX204 are cheaper than 
100G capable shelves for the old platform. 


Regards, 


Baldur 




On Wed, May 15, 2019 at 8:42 PM < mike.l...@gmail.com > wrote: 





Hello Baldur, 


What routers are you running? 


-Mike 

On May 15, 2019, at 11:22, Baldur Norddahl < baldur.nordd...@gmail.com > wrote: 


<blockquote>



Hello 


On Wed, May 15, 2019 at 3:56 PM Mike Hammett < na...@ics-il.net > wrote: 

<blockquote>


What is the most common platform people are using with such limitations? How 
long ago was it deprecated? 








We are a small network with approx 10k customers and two core routers. The 
routers are advertised as 2 million FIB and 10 million RIB. 


This morning at about 2 AM CET our iBGP session between the two core routers 
started flapping every 5 minutes. This is how long it takes to exchange the 
full table between the routers. The eBGP sessions to our transits were stable 
and never went down. 


The iBGP session is a MPLS multiprotocol BGP session that exhanges IPv4, IPv6 
and VRF in a single session. 


We are working closely together with another ISP that have the same routers. 
His network went down as well. 


Nothing would help until I culled the majority of the IPv6 routes by installing 
a default IPv6 route together with a filter, that drops every IPv6 route 
received on our transits. After that I could not make any more experimentation. 
Need to have a maintenance window during the night. 


These routers have shared IPv4 and IPv6 memory space. My theory is that the 
combined prefix numbers is causing the problem. But it could also be some IPv6 
prefix first seen this night, that triggers a bug. Or something else. 


Regards, 


Baldur 




</blockquote>

</blockquote>

Reply via email to