The alternative or complementary approach is something like batfish[1], for validation vs. emulation.

--
Hugo Slabbert       | email, xmpp/jabber: [email protected]
pgp key: B178313E   | also on Signal

[1] https://www.batfish.org/

On Wed 2019-Oct-16 12:19:31 -0400, Yan Filyurin <[email protected]> wrote:

This also depends on your scale.  If you have lots of routers, you would end up with 
lots of compute to run the VM instances.  If you get the compute (which is cheap 
comparing to actual network hardware), you would need a "cloud orchestration” 
tool and a a system to connections from host to host like some form of overlay 
networking.

GNS3 would do a good job, but for something with a bit more orchestration APIs. 
 There is this:

https://networkop.co.uk/post/2019-01-k8s-vrnetlab/ 
<https://networkop.co.uk/post/2019-01-k8s-vrnetlab/>

And the nice people who even show up to NANOG every once in a while:

https://www.tesuto.com/ <https://www.tesuto.com/>

There are a few other tools that people built on their own if you scrub GitHub. 
 I even felt into that trap and exploring VRnetlab.

But numerous things were achieved.  Yes, you would miss out on all the hardware 
bugs, hardware adaption layer issues and maybe a scale issue or two, but with 
enough instances, route generators and maybe even some application (some of 
these things can even forward traffic), you could discover 90% of things that 
can go wrong.

And you get the flexibility of downloading evaluation images of all kinds of 
things, so maybe you can avoid spending any money.

Yan




On Oct 16, 2019, at 12:03 PM, Jason Kuehl <[email protected]> wrote:

I did this at my current company with also using VM Palo Alto.

Greeting of testing out a plan to make sure its insane.

The key it keeping its all up todate down to the firmware version (I know its 
not possible for some because virtual)

The things this wont find are hardware related faults or issues.

On Wed, Oct 16, 2019 at 11:52 AM Ryland Kremeier <[email protected] 
<mailto:[email protected]>> wrote:
Hello,



I’m currently in the process of setting up a near identical network to our own 
in GNS3 for testing purposes. Has anyone here tried this before to any success? 
We need to buy the Cisco IOSv image to continue with the sim so I figured I 
would inquire here first before diving in.



All info is appreciated,

--

Ryland Kremeier



--
Sincerely,

Jason W Kuehl
Cell 920-419-8983
[email protected] <mailto:[email protected]>

Attachment: signature.asc
Description: Digital signature

Reply via email to