The downside to waves are that they're typically not protected. So a cut will take you down. If you have 10G Layer 2 ethernet, they often will have redundant paths so the only single path that can fail is between you and their first POP where they hopefully have redundancy. It can make a big difference when you're transporting data hundreds or thousands of miles. The longer the path, the less reliable the wave will be as each route mile opens you up to more risk.
On Wed, Oct 14, 2020 at 2:25 PM Mike Hammett <na...@ics-il.net> wrote: > I suppose it depends on your carrier and their capabilities. > > I much prefer waves to any kind of service that you can aggregate. Being > able to aggregate just means they're going to oversubscribe you and at some > point, you'll not get what you're paying for. Can't do that on a wave. > > > > ----- > Mike Hammett > Intelligent Computing Solutions <http://www.ics-il.com/> > <https://www.facebook.com/ICSIL> > <https://plus.google.com/+IntelligentComputingSolutionsDeKalb> > <https://www.linkedin.com/company/intelligent-computing-solutions> > <https://twitter.com/ICSIL> > Midwest Internet Exchange <http://www.midwest-ix.com/> > <https://www.facebook.com/mdwestix> > <https://www.linkedin.com/company/midwest-internet-exchange> > <https://twitter.com/mdwestix> > The Brothers WISP <http://www.thebrotherswisp.com/> > <https://www.facebook.com/thebrotherswisp> > <https://www.youtube.com/channel/UCXSdfxQv7SpoRQYNyLwntZg> > ------------------------------ > *From: *"Eric Kuhnke" <eric.kuh...@gmail.com> > *To: *"Forrest Christian (List Account)" <li...@packetflux.com> > *Cc: *"nanog list" <nanog@nanog.org> > *Sent: *Wednesday, October 14, 2020 2:25:46 AM > *Subject: *Re: Hurricane Electric AS6939 > > For small ISPs looking at setting up their first ever presence at an IX > point, you almost certainly would not be ordering an actual 'wave' (eg: a > specific DWDM channel on a legacy 10G DWDM platform, handed off to you with > 1310/LX interfaces at both ends), but lit layer 2 transport service between > the carrier hotel and your service location. > > Pricing for the two types of service can be quite different when you > request an actual 'wave' from a carrier sales person, vs just lit L2 > transport capable of large MTUs, QinQ, etc. > > The ISP carrying it might take it between those two places as simply a > vlan trunked through a larger 100G link, as a MPLS circuit, lots of > possible things. > > Unless you happened to be in a happy conjunction of the right place at the > right time, and an older DWDM system on exactly the same path you wanted > happened to have an empty channel and ready to go interface cards at both > ends. > > > > > > > On Tue, Oct 13, 2020 at 11:12 PM Forrest Christian (List Account) < > li...@packetflux.com> wrote: > >> Generally one would order a circuit (aka wave) between your location and >> the IX fabric at the interchange if you're not at the site you're wanting >> to peer at. >> >> For instance, the network I am the network engineer for has a circuit >> which terminates into the Seattle IX (SIX) fabric. We don't have any >> other presence in Seattle (or Washington for that matter) at this point - >> our circuit connects directly to our port on the Exchange. We're >> considering adding a similar link to another exchange point somewhere to >> the east or southeast of us. I haven't looked at the graphs recently, but >> it's not uncommon for >50% of our traffic to come from the exchange. And >> yes, we're peered with Hurricane and others there. >> >> We're also looking at dropping 1U or so of equipment in so we can pick up >> some transit as well, but that's a story for a different day about the joys >> of providing internet in the less populated parts of the country. >> >> In your case, it also looks like there are also some peering options at >> the datacenters you are currently at as well. You may want to do some >> more research to determine how that might work in your situation. >> PeeringDB is a good resource along with google searches for "peering 100 >> Taylor" or "peering austin data foundry" >> >> >> >> On Tue, Oct 13, 2020 at 9:51 PM <aar...@gvtc.com> wrote: >> >>> Don’t you have to be there to join? >>> >>> >>> >>> I’m in Austin and San Antonio >>> >>> >>> >>> -Aaron >>> >>> >>> >>> *From:* Mike Hammett <na...@ics-il.net> >>> *Sent:* Tuesday, October 13, 2020 7:20 PM >>> *To:* Aaron Gould <aar...@gvtc.com> >>> *Cc:* nanog@nanog.org >>> *Subject:* Re: Hurricane Electric AS6939 >>> >>> >>> >>> https://bgp.he.net/AS16527 >>> >>> >>> >>> You don't appear to be on any IXes. Definitely join some IXes before >>> buying another 100G of transit. >>> >>> >>> >>> DFW has a couple and there are some more that are starting up. >>> >>> >>> >>> >>> >>> ----- >>> Mike Hammett >>> Intelligent Computing Solutions <http://www.ics-il.com/> >>> <https://www.facebook.com/ICSIL> >>> <https://plus.google.com/+IntelligentComputingSolutionsDeKalb> >>> <https://www.linkedin.com/company/intelligent-computing-solutions> >>> <https://twitter.com/ICSIL> >>> Midwest Internet Exchange <http://www.midwest-ix.com/> >>> <https://www.facebook.com/mdwestix> >>> <https://www.linkedin.com/company/midwest-internet-exchange> >>> <https://twitter.com/mdwestix> >>> The Brothers WISP <http://www.thebrotherswisp.com/> >>> <https://www.facebook.com/thebrotherswisp> >>> <https://www.youtube.com/channel/UCXSdfxQv7SpoRQYNyLwntZg> >>> ------------------------------ >>> >>> *From: *"Aaron Gould" <aar...@gvtc.com> >>> *To: *nanog@nanog.org >>> *Sent: *Tuesday, October 13, 2020 6:29:55 PM >>> *Subject: *Hurricane Electric AS6939 >>> >>> Do y’all like HE for Internet uplink? I’m thinking about using them for >>> 100gig in Texas. It would be for my eyeballs ISP. We currently have >>> Spectrum, Telia and Cogent. >>> >>> -Aaron >>> >>> >>> >> >> >> -- >> - Forrest >> > > -- Darin Steffl Minnesota WiFi www.mnwifi.com 507-634-WiFi Like us on Facebook <http://www.facebook.com/minnesotawifi>
