Not a lot of 10G capable CPEs out there. For our 10G residential
customers we install Brocade ICXs.
Aaron
On 4/15/2016 3:18 PM, David Sotnick wrote:
Hello masters of the Internet,
I was recently asked to set up networking at a VIP's home where he has
Comcast "Gigabit Pro" service, which is delivered on a 10G-SR MM port on a
Comcast-supplied Juniper ACX-2100 router.
Which customer router would you suggest for such a setup? It needs to do
IPv4 NAT, DHCP, IPv4+IPv6 routing and have a decent L4 firewall (that also
supports IPv6).
The customer pays for "2Gb" service (Comcast caps this at 2G+10% = 2.2Gbps)
and would like to get what he pays for (*cough*) by having the ability to
stream two 1Gbps streams (or at least achieve > 1.0Gbps).
I'm tempted to get another ACX-2100 and do a 4x1Gb LACP port-channel to the
customer switch, or replace the AV-integrator-installed Cisco SG300-52P
(Cisco switch with e.g. an EX-3300 with 10Gb uplinks).
Thanks in advance for your suggestions.
-Dave
--
================================================================
Aaron Wendel
Chief Technical Officer
Wholesale Internet, Inc. (AS 32097)
(816)550-9030
http://www.wholesaleinternet.com
================================================================
