Check out the Mikrotik Cloud Core routers, they make them with SFP+ support now. I have one of them with 10g deployed right now.
-Mike > On Apr 15, 2016, at 14:52, Aaron <aa...@wholesaleinternet.net> wrote: > > Not a lot of 10G capable CPEs out there. For our 10G residential customers > we install Brocade ICXs. > > Aaron > > >> On 4/15/2016 3:18 PM, David Sotnick wrote: >> Hello masters of the Internet, >> >> I was recently asked to set up networking at a VIP's home where he has >> Comcast "Gigabit Pro" service, which is delivered on a 10G-SR MM port on a >> Comcast-supplied Juniper ACX-2100 router. >> >> Which customer router would you suggest for such a setup? It needs to do >> IPv4 NAT, DHCP, IPv4+IPv6 routing and have a decent L4 firewall (that also >> supports IPv6). >> >> The customer pays for "2Gb" service (Comcast caps this at 2G+10% = 2.2Gbps) >> and would like to get what he pays for (*cough*) by having the ability to >> stream two 1Gbps streams (or at least achieve > 1.0Gbps). >> >> I'm tempted to get another ACX-2100 and do a 4x1Gb LACP port-channel to the >> customer switch, or replace the AV-integrator-installed Cisco SG300-52P >> (Cisco switch with e.g. an EX-3300 with 10Gb uplinks). >> >> Thanks in advance for your suggestions. >> >> -Dave > > -- > ================================================================ > Aaron Wendel > Chief Technical Officer > Wholesale Internet, Inc. (AS 32097) > (816)550-9030 > http://www.wholesaleinternet.com > ================================================================ >