HA! But the question is; does it pass? ^^^ and that was my official 'first post' beware my linked in requests now😊
-----Original Message----- From: NANOG <nanog-boun...@nanog.org> On Behalf Of Phillip Carroll Sent: Wednesday, December 12, 2018 4:53 PM To: nanog@nanog.org Subject: RE: Extending network over a dry pair Whenever I have a dry pair I use fluke lube. -----Original Message----- From: NANOG <nanog-boun...@nanog.org> On Behalf Of Blake Hudson Sent: Wednesday, December 12, 2018 3:40 PM To: nanog@nanog.org Subject: Re: Extending network over a dry pair Nick Bogle wrote on 12/12/2018 3:25 PM: > A quick question for you guys; > > If you had a single dry pair (pair of copper wires originally for > phones) to a remote site that was around 6 miles away, what would you > use? We currently are just extending a T1 line to this site, but > 1.5Mbps isn't cutting it anymore. Unfortunately it's a research site > on a federally protected wildlife preserve so we can't run any new > infrastructure (fiber etc) and it isn't in a geographical place where > point to point wireless is practical. We were thinking there is some > sort of network extender that uses some form of DSL for higher > bandwidth capacity. > > Any suggestions? Blackbox makes a variety of different types of " network extenders" (aka bridges) - https://www.blackbox.com/en-us/products/black-box-brand-products/networking/extenders As others have said, 6 miles might limit your bandwidth capacity. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - The information contained in this electronic message may be confidential, and the message is for the use of intended recipients only. If you are not the intended recipient, do not disseminate, copy, or disclose this communication or its contents. If you have received this communication in error, please immediately notify me by replying to the email or call MIS Alliance at 617-500-1700 and permanently delete this communication.
