On Sat, 9 Nov 2019 10:55:07 -0500 Mhel Marcelo <jaqu...@gmx.com> wrote:
> Hi, > > Just tinkering here. > I'm trying to get nano-X working with my setup. > It's an Alwinner H5 base armboard, nanopi neo2 512Mb RAM. > Using fbtft spi device driver for small tft LCD. > > I managed to build nano-X and mwin using config.linux-fb. > But I can't seem to get nano-X sample program to show something > on the my LCD. I am however able to run mwin example to show, > as seen here: https://imgur.com/a/z34JReX . > > I can launch nano-X and the sample program fine without errors, > but I only get blank screen. > When I launch nano-X I get this at the prompt: > > root@OpenWrt:~# 320x240x16bpp pitch 640 type 0 visual 2 colors 65536 > pixtype 5 > > It seems to be doing something because it erases the screen > it turns black. If run the program it turns to blank screen. > > I'm cross compiling for OpenWRT running kernel 4.19.81. > What should I be looking at to figure out what's going wrong? > > Thanks, > Mhel > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: nanogui-unsubscr...@linuxhacker.org > For additional commands, e-mail: nanogui-h...@linuxhacker.org > I changed some config, compared it to the others. It seems to be working now. I'm wondering why nano-X goes down when I close the application. (I'm also wondering how one can use gpio buttons since I'm not using mouse or keyboard,I guess that's for another topic) :Cheers: Mhel --------------------------------------------------------------------- To unsubscribe, e-mail: nanogui-unsubscr...@linuxhacker.org For additional commands, e-mail: nanogui-h...@linuxhacker.org