Hi all, i'm trying to use NAV 3.1.1 in my environment, my main problem seems to be that my network in mainly based on HP router/switches: 9304m (foundry/hp), procurve 5304, 5308, 2824 etc.. and a couple of cisco. I don't have cdp active on any machine, the net is ospf based and snmp enabled.
The Cisco machines are fully understood, i can see the vlans that are there defined, counters and so on, everything is fine. Some HP machines are understood too or a sort of mainly Procurve family 25xx e 53xx even if i can't see the vlans that are defined on those router/switches. Hp/Foundry 9304m is the worst understood: non only it doesn't show any defined vlan but it doesn't show the expansions slots that are fitted in the chassis. Obviously these are my main router/switches. :) I've tried to see if there where a problem related to OIDs for this machine, but the one that NAV proposes when i add the machine is the same i get executing the snmpwalk query that's in the Online Help. I would like to know what i can do now, what infos you may need to understand what's foing on and if there's something i can test/post etc. Hope to here from you soon. Marco Barbieri. P.S.: btw, it looks like a great tool ;-) -- Marco Barbieri - CeSIA - 059-2055218 _______________________________________________ nav-users mailing list [email protected] http://mailman.itea.ntnu.no/mailman/listinfo/nav-users
