On Mon, 8 Jan 2007, Marco Barbieri wrote:
> Hi all, > i'm trying to use NAV 3.1.1 in my environment, my main problem seems to be > that my network in mainly based on HP router/switches: 9304m (foundry/hp), > procurve 5304, 5308, 2824 etc.. and a couple of cisco. > I don't have cdp active on any machine, the net is ospf based and snmp > enabled. > > The Cisco machines are fully understood, i can see the vlans that are there > defined, counters and so on, everything is fine. > > Some HP machines are understood too or a sort of mainly Procurve family 25xx > e > 53xx even if i can't see the vlans that are defined on those router/switches. > > Hp/Foundry 9304m is the worst understood: non only it doesn't show any > defined > vlan but it doesn't show the expansions slots that are fitted in the chassis. > Obviously these are my main router/switches. :) We have never tested NAV with a Hp/Foundry 9304m. Can you send us the list of OIDs NAV classifies the box to and we can take it from there. Typically the data from https://yournav/report/netboxsnmpoid?netboxid=id of your foundry (linked from the "All IP devices report, right column). So you do not see any router ports in NAV? - Vidar _______________________________________________ nav-users mailing list [email protected] http://mailman.itea.ntnu.no/mailman/listinfo/nav-users
