Dear Gustaf,
Thank you very much for your help.
It does work perfectly, therefore it is configuration related.
I'll work with my setup and double check everything in the config
file.
When I pinpoint the problem I'll post the solution to close the
thread.
Best regards,
Óscar
-----Mensaje original-----
De: Gustaf Neumann <neum...@wu.ac.at>
Responder a: naviserver-devel@lists.sourceforge.net
Para: naviserver-devel@lists.sourceforge.net
Asunto: Re: [naviserver-devel] Problem with new pthread code:
Resource temporarily unavailable
Fecha: Tue, 27 Apr 2021 12:12:36 +0200
Just a quick followup: I've tested what I've suggested below with
Debian buster (== Debian stable)
root@buster# uname -a Linux buster 4.19.0-13-amd64 #1 SMP
Debian 4.19.160-2 (2020-11-28) x86_64 GNU/Linux
root@buster# lsb_release -d Description: Debian GNU/Linux
10 (buster)
and everything looks ok
all the best
-gn
On 27.04.21 11:52, Gustaf Neumann
wrote:
> Dear
> Oscar,
>
>
>
>
> Can you make please a quick check:
>
>
> when you run [1] the installation says at the end:
>
>
>
>
> You can now run plain NaviServer by typing the following
> command:
>
>
> sudo /usr/local/ns/bin/nsd -f -u nsadmin -g nsadmin -t
> /usr/local/ns/conf/nsd-config.tcl
>
>
>
>
> When you start this instance of naviserver, does it work?
>
>
> If you, we know the libraries on your machine are fine, the
> problem is
>
>
> either your installation process or the used configuration
> file.
>
>
>
>
> all the best
>
>
>
>
> -gn
>
>
>
>
> [1] https://github.com/gustafn/install-ns
>
>
>
_______________________________________________naviserver-devel
mailing listnaviserver-de...@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/naviserver-devel
_______________________________________________
naviserver-devel mailing list
naviserver-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/naviserver-devel
