Hi Joe,
We use Loctite 495 or 416 with the 712 accelerator (we have a T/C welder in
case they break upon removal). We also use an IR probe which connects to the
multimeter for those hard to get locations.
Ed
From: Joe Finlayson <[email protected]>
Reply-To: Joe Finlayson <[email protected]>
To: "'NEBS Newsgroup'" <[email protected]>, "'EMC PSTC'"
<[email protected]>
Subject: Thermocouple issues
Date: Fri, 15 Dec 2000 14:52:45 -0500
I am in the process of performing a thermal evaluation and am using
thermocouples to measure surface temperatures of IC's, etc. I'm finding
that the thermocouple tape that I'm using tends to experience a degradation
of the adhesive as the temperatures increase (in the 80-100°C range)
causing
the thermocouples to separate from the surfaces. I'd appreciate any advice
that could point to a higher performing tape/adhesive for such an
application. Some of the IC's are quite small which doesn't leave much
surface area for adhesion and I am using as many as 40 thermocouples per
card.
Thx,
Joe
*********************************
<<...>>
Joe Finlayson
Manager, Compliance Engineering
Telica, Inc.
734 Forest Street, Bldg. G, Suite 100
Marlboro, MA 01752
Tel: (508) 480-0909 x212
Fax: (508) 480-0922
Email: [email protected]
Web: www.telica.com
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Jim Bacher: [email protected]
Michael Garretson: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Jim Bacher: [email protected]
Michael Garretson: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
