George,
I am aware of the NEBS and ETSI specs which apply to my product. My
question is whether a product that has been evaluated to these requirements
will be accepted by the Telecom Service Providers in Japan, China, Korea,
etc. or do they have their own set of requirements. Also, are certain
requirements that may apply to "commercial products" waived if the product
is only destined for the central office?
Thx,
Joe
-----Original Message-----
From: Berkley [mailto:berk...@attbi.com]
Sent: Friday, September 06, 2002 2:15 PM
To: Joe Finlayson; 'NEBS Newsgroup'; 'EMC PSTC'
Subject: Re: NEBS/ETSI Equivalents for PAC RIM
Joe,
You'll want to look at ETS EN 300-386-2 for EMI/C and EN 300-019 for
Environmental.
George
----- Original Message -----
From: "Joe Finlayson" <jfinlay...@telica.com>
To: "'NEBS Newsgroup'" <NEBS@world.std.com>; "'EMC PSTC'"
<emc-p...@ieee.org>
Sent: Friday, September 06, 2002 11:01 AM
Subject: NEBS/ETSI Equivalents for PAC RIM
>
>
> I'm looking to get some feedback regarding carrier requirements in
> the PAC RIM for products destined ONLY for the Central Office. For those
> who have ventured into these regions with carrier class equipment, has
NEBS
> and ETSI carried enough weight or have some countries/carriers required
> additional testing. I would also be interested in hearing whether Product
> Safety and/or EMC certifications are required or are declarations/reports
> sufficient when product is destined for the central office ONLY. I'll
take
> whatever you have but my primary concern for now is:
>
> Japan
> China
> Australia/NZ
> Korea
>
> Any and all input, feedback, links, etc. would be greatly
> appreciated.
>
> Thx,
>
>
> Joe
>
> *********************************
> <<...OLE_Obj...>>
>
> Joe Finlayson
> Manager, Compliance Engineering
> Telica, Inc.
> 734 Forest Street, Bldg. G, Suite 100
> Marlboro, MA 01752
> Tel: (508) 804-8212
> Fax: (508) 480-0922
> Email: jfinlay...@telica.com
> Web: www.telica.com
>
>
> -------------------------------------------
> This message is from the IEEE EMC Society Product Safety
> Technical Committee emc-pstc discussion list.
>
> Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
>
> To cancel your subscription, send mail to:
> majord...@ieee.org
> with the single line:
> unsubscribe emc-pstc
>
> For help, send mail to the list administrators:
> Ron Pickard: emc-p...@hypercom.com
> Dave Heald: davehe...@attbi.com
>
> For policy questions, send mail to:
> Richard Nute: ri...@ieee.org
> Jim Bacher: j.bac...@ieee.org
>
> All emc-pstc postings are archived and searchable on the web at:
> http://ieeepstc.mindcruiser.com/
> Click on "browse" and then "emc-pstc mailing list"
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
majord...@ieee.org
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Ron Pickard: emc-p...@hypercom.com
Dave Heald: davehe...@attbi.com
For policy questions, send mail to:
Richard Nute: ri...@ieee.org
Jim Bacher: j.bac...@ieee.org
All emc-pstc postings are archived and searchable on the web at:
http://ieeepstc.mindcruiser.com/
Click on "browse" and then "emc-pstc mailing list"
