Hey Tim here is the simplest way to reduce file size using windows: Open your file (picture) then click 'save as' this will give you the option to reduce the quality therefore file size of your picture. Hope that helps. I would also be very interested in one of these cylinders. Why not keep the ends with the piston shaft hole? That end could be used, maybe fitting a switch or used as a cable entry, certainly worth keeping\using. How large is the hole by the way? I would guess no more than 20mm or am I looking at this wrong lol. Where are you in this big wide world by the way? Dave.
On 4 Feb, 11:17, [email protected] wrote: > Failed the first time message too large google 4 meg limit. So only > sending one picture. I need to find out how to reduce the file sizes. As > I don't need the resolution of my 10 megapixel camera. Tim > > > > > I sent this out to William. I though the rest of the group might be > > interested? > > > Hi sorry for the delay in replying. I got the 4 cylinders out of the > > trash and took them apart. I saved the endbells without the hole for the > > piston rod. So I have enough parts to make 2 enclosures using the > > original endbells. ID is 63mm or 2.5 inches stroke is 90mm Center > > extrusion measures about 5.6 inches Endbells add about 1.375 on each end. > > This darn program lost my first message so this is the second attempt. > > > Tim Laing > > > > IMG_0501.JPG > 2171KViewDownload -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To post to this group, send an email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/neonixie-l?hl=en-GB.
