not sure, but it might. Worth a try.

On Feb 5, 9:05 pm, will <[email protected]> wrote:
> My anode driver is the same as yours, except for R1, R2, and R3 are
> all 10K and R2 is between MPSA42 emitter and ground instead of MPSA92
> base and MPSA42 collector. Do you think that would cause my driver to
> work slowly?
>
> On Feb 5, 8:37 pm, "M.J.Sangster" <[email protected]> wrote:
>
> > I agree, seems like like a lot of extra parts. How about the anode
> > drivers? It might cause the problem. Just to see what happens, try the
> > anode driver I've used (it's used in a lot of multiplex designs), it
> > seems to work well.
>
> >http://www.coldwarcreations.com/pdf/in14clock3.pdf
>
> > - Michael
>
> > On Feb 5, 4:12 pm, will <[email protected]> wrote:
>
> > > Grr, so many extra parts... plus, with those resistors it would waste
> > > ~300mW by my calculations. Darn.
>
> > > On Feb 5, 12:31 pm, "Frank Bemelman" <[email protected]>
> > > wrote:
>
> > > > You could add 10 small diodes and 2 
> > > > resistors:http://www.franktechniek.nl/NixieClock/IN14-6-V1/IN14-6-V2-Files/IN14...
> > > > Frank
>
> > > > ----- Original Message -----
> > > > From: "will" <[email protected]>
> > > > To: "neonixie-l" <[email protected]>
> > > > Sent: Saturday, February 05, 2011 7:09 AM
> > > > Subject: [neonixie-l] Ghosting on IN-14s even with long blanking period.
>
> > > > I got my IN-14s in the mail the other day (Well, three out of four,
> > > > one was broken, but m_bulb on ebay very kindly offered to send me two
> > > > more tubes. Awesome customer service right there). I've been working
> > > > on multiplexing them, and everything works well except for the fact
> > > > that I'm experiencing some annoying ghosting. My code basically looks
> > > > like this:
> > > > [snip]

-- 
You received this message because you are subscribed to the Google Groups 
"neonixie-l" group.
To post to this group, send an email to [email protected].
To unsubscribe from this group, send email to 
[email protected].
For more options, visit this group at 
http://groups.google.com/group/neonixie-l?hl=en-GB.

Reply via email to