Alright. I'll try it later or tomorrow. That would certainly be a bummer as I just finished my anode driver board.
On Feb 5, 10:05 pm, "M.J.Sangster" <[email protected]> wrote: > not sure, but it might. Worth a try. > > On Feb 5, 9:05 pm, will <[email protected]> wrote: > > > > > > > > > My anode driver is the same as yours, except for R1, R2, and R3 are > > all 10K and R2 is between MPSA42 emitter and ground instead of MPSA92 > > base and MPSA42 collector. Do you think that would cause my driver to > > work slowly? > > > On Feb 5, 8:37 pm, "M.J.Sangster" <[email protected]> wrote: > > > > I agree, seems like like a lot of extra parts. How about the anode > > > drivers? It might cause the problem. Just to see what happens, try the > > > anode driver I've used (it's used in a lot of multiplex designs), it > > > seems to work well. > > > >http://www.coldwarcreations.com/pdf/in14clock3.pdf > > > > - Michael > > > > On Feb 5, 4:12 pm, will <[email protected]> wrote: > > > > > Grr, so many extra parts... plus, with those resistors it would waste > > > > ~300mW by my calculations. Darn. > > > > > On Feb 5, 12:31 pm, "Frank Bemelman" <[email protected]> > > > > wrote: > > > > > > You could add 10 small diodes and 2 > > > > > resistors:http://www.franktechniek.nl/NixieClock/IN14-6-V1/IN14-6-V2-Files/IN14... > > > > > Frank > > > > > > ----- Original Message ----- > > > > > From: "will" <[email protected]> > > > > > To: "neonixie-l" <[email protected]> > > > > > Sent: Saturday, February 05, 2011 7:09 AM > > > > > Subject: [neonixie-l] Ghosting on IN-14s even with long blanking > > > > > period. > > > > > > I got my IN-14s in the mail the other day (Well, three out of four, > > > > > one was broken, but m_bulb on ebay very kindly offered to send me two > > > > > more tubes. Awesome customer service right there). I've been working > > > > > on multiplexing them, and everything works well except for the fact > > > > > that I'm experiencing some annoying ghosting. My code basically looks > > > > > like this: > > > > > [snip] -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To post to this group, send an email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/neonixie-l?hl=en-GB.
