On 12-03-20 09:40 PM, threeneurons wrote:
Cheapest option is to make your own PCB. That's what the magazine artwork was originally intended for. There are a few guys here that have done it, so they might help you out.
The MG Chemicals line still has all the stuff for working from a layout. Depending on how many IC packages are involved, the Photocopy to Overhead film to make a negative method may work, but that tends to enlarge/reduce the size slightly. No problem if you are just using transistors and such, a reall problem if you have 40 pin Dips.
see http://www.mgchemicals.com/products/prototype.html http://www.mgchemicals.com/ -- Charles MacDonald Stittsville Ontario [email protected] Just Beyond the Fringe http://users.trytel.com/~cmacd/tubes.html No Microsoft Products were used in sending this e-mail. -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To post to this group, send an email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/neonixie-l?hl=en-GB.
