By pure co-incidence, I have a Haicom HI-204E on my desk here, completely un-nixie related. I liberated it from work a few years back and was going to use it, along with a PIC16F877, to run the display section from an old scrolling 60x7 LED board that has a somewhat handicapped controller at present. I have a drawer full of 16f877 and a somewhat masochistic attitude to writing software. I also have the manual for said GPS receiver, and the CD with the manual as a .pdf so can upload it if interested? If anyone does get any source code, I would definitely be interested in having a peruse of his GPS routines :-) - Alex
On Thursday, 31 July 2014 15:27:18 UTC+1, rubli wrote: > > I found the mail Jeff once sent me : > > Correct, the GPS receiver is a Haicom HI-203E. > The PS2 connector pinout may still be available on the Haicom web site. > Four of the pins are active: Power=5vdc, Gnd, Serial data IN, Serial data > OUT. 4800b, 8 bits, no parity. > Only the $GPRMC is transmitted at each epoch (one per second), all other > NMEA-0183 strings are disabled during reprogramming here when the clocks > are assembled. > > If you can locate the pinout, then you can use any terminal program set to > 4800b to monitor the output. If the receiver does output the string, then > the clock is bad, and must be returned for repair. > > Jeff > > On Apr 7, 2006, at 10:40 AM, Alex Rubli wrote: > > -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/fafddccc-c191-4cdf-b28c-0d4da81ba5d8%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
