Hi, John Rehwinkel wrote: > I suspect that wouldn't work the way you want. I think that resistor > parallels > part of the voltage divider in the feedback loop. By introducing a separate > voltage, you would reduce the sensitivity of the feedback loop and thereby > produce poorer regulation.
Possibly, yes. But it looks like this is an "official" way to change the output voltage, especially for voltages below 150V, so I expect the regulation won't get too poor. I don't own one of the modules in question though, so OP might want to try if it works or not by supplying an external voltage from a lab supply or similar. Best Regards, Arne -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/540CF801.5010508%40blinkenarea.org. For more options, visit https://groups.google.com/d/optout.
