The LEDs could light very dimly due to, as you say, leakage on the "sender", but it also could do so due to mechanical vibration of the system in the roof, spinning of the wind arrow or to leakage in the cable. If it is not too disturbing, just don't run the risk. Remember too that the circuit was designed to run lamps which are less sensitive to pulses and leakage.
On Monday, April 11, 2016 at 12:32:20 PM UTC-3, Kerry Borgne wrote: > > > <https://lh3.googleusercontent.com/-L3lDMMQt7yM/VwvBUjXPjOI/AAAAAAAAAJk/cLgU4I6h7pwo0nokANfyccZLeQUdMdYtw/s1600/IMG_2733.JPG> > > > So, installed the LEDS and all is well.... almost. One of the reed > switches in the outdoor sending unit (you know, the one up on the roof!) > is bad, plus there appears to be a bit of leakage on the senders internal > circuit board as on occasion an LED will light very dimly when it > shouldn't. Not too surprising as it's been up there for at least 15 years! > I guess a trip up onto the roof is in order AFTER the weather settles down.. > >> >> -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/e2592eb6-c07d-4744-bd5c-6b70e3dc5d78%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
