Super easy in Eagle. Put your cursor over the part origin, right click, click on properties. Enter the desired angle in the angle field. In this case, -4.15
Terry On Thursday, March 16, 2017 at 3:24:00 PM UTC-5, Paul Andrews wrote: > > Does anyone have Eagle or Kicad footprint files that have this fix, or how > easy is it to rotate a footprint in either Eagle or KiCAD? > > On Tuesday, February 7, 2017 at 2:38:57 AM UTC-5, Nixcited delighted wrote: >> >> Just to remind people that the diagram on Dieter's website >> http://www.tube-tester.com/sites/nixie/data/in18.htm for the IN-18 >> pinout is wrong. I would not know how many people have fallen foul of this, >> but I did. The tube needs rotating about 4.15ยบ degrees clockwise. The IN-18 >> sockets Dieter sells would also seem to replicate this error. >> >> See diagram attached: >> >> >> John S >> >> >> On 7 Feb 2017, at 03:48, Paul Andrews wrote: >> >> Does anyone have any suggestions about how to mount IN-18 tubes? It looks >> like they are intended to be socketed and I see some sockets/pins on ebay. >> I would like to underlight them too, if that makes a difference. >> >> By the way, does anyone have CAD files for the physical pin layout? e.g >> DXF files, and/or KiCAD footprints? >> >> -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/a98449c0-39ee-432d-bdb9-cccbd45cda7e%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
