I used a conversion tool that generates KiCAD legacy format library files and uploaded them too.
From: Paul Andrews Sent: Saturday, March 18, 2017 7:00 PM To: neonixie-l Subject: [neonixie-l] Re: Mounting IN-18 tubes I uploaded a version of the russian-nixies.lbr (Eagle footprint library) here that has a corrected footprint. I added a footprint with pads for the female D-SUB pins that many folk seem to use as sockets. I'll add KiCAD files when I figure out how best to get them from the Eagle files! On Monday, February 6, 2017 at 10:48:04 PM UTC-5, Paul Andrews wrote: Hi, Does anyone have any suggestions about how to mount IN-18 tubes? It looks like they are intended to be socketed and I see some sockets/pins on ebay. I would like to underlight them too, if that makes a difference. By the way, does anyone have CAD files for the physical pin layout? e.g DXF files, and/or KiCAD footprints? Thanks - Paul -- You received this message because you are subscribed to a topic in the Google Groups "neonixie-l" group. To unsubscribe from this topic, visit https://groups.google.com/d/topic/neonixie-l/N59nth-xP0A/unsubscribe. To unsubscribe from this group and all its topics, send an email to [email protected]. To post to this group, send email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/a368232e-99d5-4d50-ad3c-23a8c83b06f3%40googlegroups.com. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/58cdbf12.5322c80a.3226f.1466%40mx.google.com. For more options, visit https://groups.google.com/d/optout.
