<https://lh3.googleusercontent.com/-gvtPlD1QBVA/WXTiZyHGAUI/AAAAAAAABPo/DZtVQG6htmk1ElGCnhCBDIiZKsxEmXy4gCLcBGAs/s1600/DSC_0646a.jpg>
<https://lh3.googleusercontent.com/-85L9YCOmjGg/WXTikqlzjuI/AAAAAAAABPs/dPDqJA-RPIAuJVKHWOLjfhAUQGxxv6djQCLcBGAs/s1600/DSC_0651a.jpg> <https://lh3.googleusercontent.com/-C26osGccJE4/WXTitrqhx9I/AAAAAAAABPw/k8xbMVHbjeMeiLRPh28QzPvQBIOc6VovQCLcBGAs/s1600/DSC_0645a.jpg> <https://lh3.googleusercontent.com/-amgDLr68nRY/WXTfkR8v4wI/AAAAAAAABPc/sjFypV80QJUfPBFHyTx_d6DTEi5lrwEIwCLcBGAs/s1600/DSC_0648a.jpg> I was trying to design an executive styled clock and when it came down to the controls, the name SARA was derived from the control buttons as I got them in the wrong order so I just left them as is! WARNING! This post contains nudity. She is a slut as she has see through knickers instead of the usual brass sheet covers I normally fit as I had run out of 0.5 mm brass sheet. The gorgeous looking Z566Ms, PV Electronics Spectrum 18 board, remote switching, illuminated temperature sensor, every part hand made including that pig of a cover tube on the Nixies and Neons, the horse shoe brackets I had to get from the UK are two part and are held with brass blind bolts which are secured with brass spreader washers and 4 mm cap screws in the base. I get my pleasure from designing clocks, I leave the electronics up to the big boys as It is hard enough for me to even change a fuse. -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/0954b0b8-2ab4-4f4e-beae-07991e051c25%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
