https://vfdclock.jimdo.com/2017/08/03/hv5wekit/
This is our newest design for NIXIE clocks,we have used this modules for over 6 month in all of the 6-tube clock we designed before,works great. The info shown blow for reference only: New Design: Vin=3V3~12V; Vout= max 200V adjustable output; (Add an extern resistor on PCB or connect outside the module for adjusting.) En Pin for turning the Module On or OFF with 3V3, 5V or even 12V Logic signal range; Std. 0.1# gap of PINS,you can install it on PCB as a small height SMD module; Small Size, 2.85Cm*1.1Cm*0.55Cm(H), can light up 6~8 pcs IN-12(IN-14) or 3pcs IN-18 at the same time with 3.7V Li battery or 5V USB power,you get almost no heat for 24*7 condition; For the people who can solder the SMD components, will have a KIT version for you to assemble the module by yourself. For others design,please check : http://vfdclock.jimdo.com -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/9f725ea1-b12b-4f44-98aa-91fdaa08bcf8%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
