<https://lh3.googleusercontent.com/-lQIghpw2F8Y/WYK83CQfPsI/AAAAAAAAAGs/AjNf8S1cXkEtyZhsc5lku-DlaV5oxkx2gCLcBGAs/s1600/hv5wE-01.JPG>
在 2017年8月3日星期四 UTC+8下午1:58:25，vfdclock写道： > > https://vfdclock.jimdo.com/2017/08/03/hv5wekit/ > > > This is our newest design for NIXIE clocks,we have used this modules for > over 6 month in all of the 6-tube clock we designed before,works great. > > > The info shown blow for reference only: > > New Design: > > Vin=3V3~12V; > > Vout= max 200V adjustable output; > > (Add an extern resistor on PCB or connect outside the module for > adjusting.) > > > > En Pin for turning the Module On or OFF with 3V3, 5V or even 12V Logic > signal range; > > > > Std. 0.1# gap of PINS,you can install it on PCB as a small height SMD > module; > > > > Small Size, 2.85Cm*1.1Cm*0.55Cm(H), can light up 6~8 pcs IN-12(IN-14) or > 3pcs IN-18 at the same time with 3.7V Li battery or 5V USB power,you get > almost no heat for 24*7 condition; > > > > For the people who can solder the SMD components, will have a KIT version > for you to assemble the module by yourself. > > > For others design,please check : > > http://vfdclock.jimdo.com > > > > > -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/9b1ff40a-e3e3-47e9-8fa8-113105b4051d%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
