<https://lh3.googleusercontent.com/-UzdRxnunhLw/WYLAIXo1L4I/AAAAAAAAAG4/P-4PQeO_yMEDPrBcacD3YioD2Cc6axI1wCLcBGAs/s1600/asasasas.jpg> This is my first USB Powered NIXIE Thermometer design,the prototype has been working for about half year, works great. We use Atmega328 MCU and DS18B20 sensor in this design.
The info shown blow for reference only: 1.Fully open hardware+Fully open source (ARDUNIO Source code in pure C); 2.Fully DIP components ,easy to assemble; 3.You can solder the NIXIE tube on the PCB or we also have a plug-able version which you can just solder the female socket pins on the PCB then Plug the NIXIE tubes on it; 4.USB Powered,easy to assmble,almost no heat when working; 5.All 0~9 digi-segs in 2 IN-14 tubes can be light up,and all segs in the IN-19 can be light up too; 6.Pure C Arduino source code, easy to understand,you can change the code by yourself or port to other platform if you wanna; 7.have led under 3 NIXIE tubes,light it or not depends on your own code; All the rest info and assembling instructions are in writing, will have a KIT version be on line soon, For more info ,please check https://vfdclock.jimdo.com/2017/08/01/thermometer/ a few days later, we are keep updating the info of this design. -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/35b3a396-8de0-4ed7-8ad0-ccee972092c0%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
