Monday or Tuesday of next week I will start building the clock kit. I will start posting pictures of the build then.
I also finished the final prints and spreadsheet for the stand and brought them to the shop the get the four plates made and drilled with the pilot holes. They will also mill the backside of the inner and outer rear plates to .125" thickness so the switches , LED's , Power connector and PIR jack will fit properly. After I get done the plates should look like this. Then back to the shop for getting the bottom curve and sides milled to the proper shape. <https://lh3.googleusercontent.com/-rGn6QPiItrk/WaDci2TYUMI/AAAAAAAAAXc/2J-NCuucW5sLrax4YJAkTVS4-pKRg9CUgCL4CGAYYCw/s1600/IMG_3734ss%2B%25282%2529.jpg> Ok finally figured out how to post the pictures. Full steam ahead:) -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/3a162ef0-cae2-431f-8c90-e833b956fc56%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
