Hi John, I can't give too much advice but I have learned that for both in-9 and in13 you want to make sure there is a bend in the leads so that the tubes can move around without putting stress on the glass of the tube.
-joe On Feb 19, 2018 6:07 AM, "John Murphy" <[email protected]> wrote: > I'm building an audio spectrum analyzer using the MSGQ7 chip, an Arduino, > and 14 IN-9 tubes (7 Left channel and 7 Right). I've got everything > working on the bench, but now it's time to get things mounted for display! > I'd like to have the tubes stand vertically next to each other. I'm > looking for suggestions on how to securely mount these tubes. If possible, > I would prefer to mount at the bottom only so that the top of the tubes are > free and clear. > > > > -- > You received this message because you are subscribed to the Google Groups > "neonixie-l" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > To view this discussion on the web, visit https://groups.google.com/d/ > msgid/neonixie-l/338d353d-1069-4d2a-8809-b8d64dc23e98%40googlegroups.com > <https://groups.google.com/d/msgid/neonixie-l/338d353d-1069-4d2a-8809-b8d64dc23e98%40googlegroups.com?utm_medium=email&utm_source=footer> > . > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/CAE%2BVk6NdnDw3N5KdCPjMjJYz7hLX7ZH2exBTcyqA5cJyV-VoxQ%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
