Turns ratio 260...   1 Volt AC in gives about 260 Volts AC out - without rectifyers etc.   Need to be very low on the AC in or you will get excessive HV out    states it is for devices using much higher voltage. 

---------- Original Message ----------
From: John Rehwinkel <[email protected]>
Date: April 19, 2018 at 9:50 AM


> Can on of my betters on the list advise on whether they see any issues with using this to test a NIMO tube using a low voltage DC input?

It seems to me it should work. The main problems I'd watch out for are overdriving it (an arc in a winding will ruin it), and regulating the voltage. You may or may not want a doubler on the output.

> Also, it doesn't come with a pinout, and I had heard that inverter transformer inputs are typically on a diagonal instead of one side. Can anyone confirm that this is standard, and suggest a way to figure out the pinout using a multimeter only (not sure if that is possible but I figured I'd ask).

It's easy with a multimeter, just check for resistance. You should get low resistance on the primary (watch out for getting zapped on the secondary while doing this), and moderate resistance on the secondary.

Regards,
John

--
You received this message because you are subscribed to the Google Groups "neonixie-l" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [email protected].
To post to this group, send an email to [email protected].
To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/8C475F01-4A6C-49D5-8DE3-7C56D15E8184%40mac.com.
For more options, visit https://groups.google.com/d/optout.

--
You received this message because you are subscribed to the Google Groups "neonixie-l" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [email protected].
To post to this group, send email to [email protected].
To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/975859337.398598.1524147948698.JavaMail.open-xchange%40mtlgui09.
For more options, visit https://groups.google.com/d/optout.

Reply via email to