I just got my first set of boards back from pcbway.com, and their quality for 2-layer boards is comparable to other suppliers I've used in the past. The online calculator for fab and shipping is very handy, and their website has more details about their capabilities than other places I've used.
Their response time and online fab-status is the best I've seen from any other vendor I've used. When I submitted my board, I mistakenly included an extra layer and they replied back within a few minutes. After making payment, I could see progress on their website updated every few hours. They display %complete rather than specific task, and it took just under 3 days for normal processing, and it took just under 2 weeks til I had my boards (I went cheap on the shipping). Cost is also very competitive. I have 10mil minimum-features (0.25mm), and their standard process is 6mils, so this wasn't pushing their capabilities. All traces look sharp, and the solder-mask is accurate. Since I'm working on a 2-board set, and they did a good job, I'll be sending them my other board as well. -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/6e56fc32-6fa8-403b-9646-6c0e9c53bb9e%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
