While I was poking around looking at generating a BOM from KiCAD, I came across this place <https://www.smallbatchassembly.com/faq/#What-is-this-place->. I haven't used them (yet). The link I sent also talks about freelance assemblers.
On Tuesday, June 12, 2018 at 3:47:09 PM UTC-4, bani wrote: > > Are there any PCB fabs who will do component placement for reasonable > price? > > Just having 1206 resistor networks placed on my boards would save me a lot > of time... > > -Dan > > On Tue, 12 Jun 2018, gregebert wrote: > > > I just got my first set of boards back from pcbway.com, and their > quality > > for 2-layer boards is comparable to other suppliers I've used in the > past. > > The online calculator for fab and shipping is very handy, and their > website > > has more details about their capabilities than other places I've used. > > > > Their response time and online fab-status is the best I've seen from any > > other vendor I've used. When I submitted my board, I mistakenly included > an > > extra layer and they replied back within a few minutes. After making > > payment, I could see progress on their website updated every few hours. > > They display %complete rather than specific task, and it took just under > 3 > > days for normal processing, and it took just under 2 weeks til I had my > > boards (I went cheap on the shipping). Cost is also very competitive. > > > > I have 10mil minimum-features (0.25mm), and their standard process is > > 6mils, so this wasn't pushing their capabilities. All traces look sharp, > > and the solder-mask is accurate. > > > > Since I'm working on a 2-board set, and they did a good job, I'll be > > sending them my other board as well. > > > > -- > > You received this message because you are subscribed to the Google > Groups "neonixie-l" group. > > To unsubscribe from this group and stop receiving emails from it, send > an email to [email protected] <javascript:>. > > To post to this group, send an email to [email protected] > <javascript:>. > > To view this discussion on the web, visit > https://groups.google.com/d/msgid/neonixie-l/6e56fc32-6fa8-403b-9646-6c0e9c53bb9e%40googlegroups.com. > > > > For more options, visit https://groups.google.com/d/optout. > > > -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/36de0d72-e64c-4bec-b884-4a7755ecc56d%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
