I've seen 2 types of grabbers - Cheaper ones that are a simple 'J' shape to reach around a pin. They work fairly well with 0.1" pitch devices. I got a bunch of these with an HP Logic Analyzer. - Similar to the picture above, almost like a pair of arms that hug the pin. With some patience, you can grab onto 0.05" pitch devices. They hold-on very well and once they are secured they wont short against adjacent pins.
The only drawback is that these grabbers require a jumper-wire to be connected, and they pop-off easily. -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/e3b3019f-e68c-41cc-8a57-8f978d4001bf%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
