Hi guys, im phill, ive just built an IN-14 nixie clock, have tested throughout, 4.7V on low output, 174V on high output, 12V input, everything went well, tested tubes, all fine, now to main power up and nothing, only 12V input is reading, there are 3 main diodes, 1 of wich appears to be shorted, so replaced, new one immediately shorted, all solder work appears fine, i cant see any bridges, sould it be possible i have a crack in the board, or just faulty diodes? Also have checked all resistors are reading correctly, i got the kit from pvelectronics who are very good from what ive read, thanks.
-- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/7bd64ecd-cd47-4de6-8d7f-b64a2073a50f%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
