Hi phill, Have you tried asking Pete Virica (PV electronics guy)?
He's probably most familiar with the intricacies of his design. David On Wed, 23 Jan 2019 at 20:36, phillip virgo <[email protected]> wrote: > Hi guys, im phill, ive just built an IN-14 nixie clock, have tested > throughout, 4.7V on low output, 174V on high output, 12V input, > everything went well, tested tubes, all fine, now to main power up and > nothing, only 12V input is reading, there are 3 main diodes, 1 of wich > appears to be shorted, so replaced, new one immediately shorted, all > solder work appears fine, i cant see any bridges, sould it be possible i > have a crack in the board, or just faulty diodes? Also have checked all > resistors are reading correctly, i got the kit from pvelectronics who are > very good from what ive read, thanks. > > -- > You received this message because you are subscribed to the Google Groups > "neonixie-l" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send an email to [email protected]. > To view this discussion on the web, visit > https://groups.google.com/d/msgid/neonixie-l/7bd64ecd-cd47-4de6-8d7f-b64a2073a50f%40googlegroups.com > . > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/CAOQ6x0EnoSeFmwc8ajqEK4bX5K3Bj4%2B584mVm8Ys6uFqHVzRXA%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
