The filament PWS is tested with ballast-resistors delivering 1,5A. That was flawless. But, anyway, it's not tested with 6 Nimos right now. I've tested your advised filament bias offset. Unfortunatelly no change to better.
Am Mittwoch, 3. Juni 2020 16:00:16 UTC+2 schrieb gregebert: > > Nice work. If you adjust the DC bias on the filament, you should be able > to reduce the ghosting and get a sharper image. > > My NIMO clock uses a DAC to set the offset, so I can have software adjust > it. > > Have you tested your power supply at full-load ? I had to make a lot of > adjustments to solve an overheating problem at full load. > -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/98adbb34-e820-4cd3-a2ed-782c5c88bfc3%40googlegroups.com.
