I particularly like the gratuitous pan to the other 5 NIMO tubes towards the end of the video.... :) Should be quite the timepiece. Well done.
On Wed, Jun 3, 2020 at 10:11 AM jörg <post...@gmail.com> wrote: > The filament PWS is tested with ballast-resistors delivering 1,5A. That > was flawless. But, anyway, it's not tested with 6 Nimos right now. > I've tested your advised filament bias offset. Unfortunatelly no change to > better. > > Am Mittwoch, 3. Juni 2020 16:00:16 UTC+2 schrieb gregebert: >> >> Nice work. If you adjust the DC bias on the filament, you should be able >> to reduce the ghosting and get a sharper image. >> >> My NIMO clock uses a DAC to set the offset, so I can have software adjust >> it. >> >> Have you tested your power supply at full-load ? I had to make a lot of >> adjustments to solve an overheating problem at full load. >> > -- > You received this message because you are subscribed to the Google Groups > "neonixie-l" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to neonixie-l+unsubscr...@googlegroups.com. > To view this discussion on the web, visit > https://groups.google.com/d/msgid/neonixie-l/98adbb34-e820-4cd3-a2ed-782c5c88bfc3%40googlegroups.com > <https://groups.google.com/d/msgid/neonixie-l/98adbb34-e820-4cd3-a2ed-782c5c88bfc3%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to neonixie-l+unsubscr...@googlegroups.com. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/CAOX%2BRHKh0PZge12r-v_fwq3ofQ8z-hbRZ_jM8D0LcQ7pgh%2ByWA%40mail.gmail.com.
