These need a higher Anode voltage (minimum 220V in some datasheets and 250V 
in some) to work properly and also cathode resistors on cathodes "1" and 
"7" to get correct current as the digits are not size corrected to get 
equal current compared to the other cathodes - you will destroy the 
cathodes faster otherwise.

They are somewhat sensitive to shaking as the welds sometines come loose 
due to the heavy ceramic piece affecting the welds on the underside if it 
is shaken violently.

I used discrete transistors, MPSA42 and CMOS CD4028 plus some resistors.

/Martin


-- 
You received this message because you are subscribed to the Google Groups 
"neonixie-l" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion on the web, visit 
https://groups.google.com/d/msgid/neonixie-l/394d1903-0baf-4408-a572-3d3da41e26ado%40googlegroups.com.

Reply via email to