One down, five to go ;-) On Tuesday, June 8, 2021 at 10:53:23 AM UTC-4 Bill Notfaded wrote:
> I loved that movie btw "Bite The Bullet" with Gene Hackman > <https://en.wikipedia.org/wiki/Gene_Hackman>, Candice Bergen > <https://en.wikipedia.org/wiki/Candice_Bergen>, and James Coburn > <https://en.wikipedia.org/wiki/James_Coburn>. I finally broke down and > bought one tube I've never had before an NL-7094. I've collected some > NL-8091's but the bigger brother I've never had before. The datasheet > recommended operating conditions says to use a 9.1K resistor with 200VDC. > It's ionizing voltage is the regular 170VDC. I was going to use my power > supply like Paul has that can generate any voltage I want to turn it up > slowly. Should I just use say maybe a 10k anode resistor to start out with > it? I was thinking turn up the voltage slowly with a the resistor on the > anode and see where the cathodes energize and lite up at? I want to be > really careful with this tube. I'm getting it with the original National > Electronics box with the big RED READOUT circle in the middle even! So > excited. > > Bill > -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/3b2f8c2a-01d9-440a-bb0e-cafd7c272d54n%40googlegroups.com.
