A few of approximately a hundred had a width of 30.4mm for the largest with black Bakelite base, 30.5mm with brown Bakelite and 30.3mm with metal base measured with a caliper. Some were tilted somewhat in the bases so if you are having a tight fit those would not fit as they were tilted a millimeter or more.
/Martin On Monday, 11 October 2021 at 18:36:54 UTC+2 Sgitheach wrote: > Hi all, > > The OG4 datasheet says the maximum diameter of the glass bottle of an > OG4 is 31mm. A quick check of the few OG4 that I have suggests no more > than 30mm in practice. I'm trying to fit an OG4 through an existing hole > reliably and not be dependant on the few samples I have. > > If anyone has some OG4s to hand and some calipers, then I'd appreciate > knowing any measurements that are made and reported here. > > Ta Grahame > > > -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/290db4e9-47ea-4676-b541-97a79bef704fn%40googlegroups.com.
