Hi Martin
Thanks for your measurements and observations. Other people have made
similar comments privately (thanks again). The tilt does make using the
OG4 in a display function more difficult... I shall continue working
with British and American dekatrons for now.
Grahame
On 11/10/2021 21:24, Dekatron42 wrote:
A few of approximately a hundred had a width of 30.4mm for the largest
with black Bakelite base, 30.5mm with brown Bakelite and 30.3mm with
metal base measured with a caliper. Some were tilted somewhat in the
bases so if you are having a tight fit those would not fit as they
were tilted a millimeter or more.
/Martin
On Monday, 11 October 2021 at 18:36:54 UTC+2 Sgitheach wrote:
Hi all,
The OG4 datasheet says the maximum diameter of the glass bottle of an
OG4 is 31mm. A quick check of the few OG4 that I have suggests no
more
than 30mm in practice. I'm trying to fit an OG4 through an
existing hole
reliably and not be dependant on the few samples I have.
If anyone has some OG4s to hand and some calipers, then I'd
appreciate
knowing any measurements that are made and reported here.
Ta Grahame
--
You received this message because you are subscribed to the Google
Groups "neonixie-l" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to neonixie-l+unsubscr...@googlegroups.com
<mailto:neonixie-l+unsubscr...@googlegroups.com>.
To view this discussion on the web, visit
https://groups.google.com/d/msgid/neonixie-l/290db4e9-47ea-4676-b541-97a79bef704fn%40googlegroups.com
<https://groups.google.com/d/msgid/neonixie-l/290db4e9-47ea-4676-b541-97a79bef704fn%40googlegroups.com?utm_medium=email&utm_source=footer>.
--
You received this message because you are subscribed to the Google Groups
"neonixie-l" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to neonixie-l+unsubscr...@googlegroups.com.
To view this discussion on the web, visit
https://groups.google.com/d/msgid/neonixie-l/9b5587c5-ec0e-3945-5887-bad224de8196%40googlemail.com.
