I wonder how the filament is driven as I see no transformer but two inductors - 
Did anyone look into how these Noritake displays works power-wise?

// Per.

> On 13 Jan 2026, at 12.49, Tom Katt <[email protected]> wrote:
> 
> Since the POS displays seem to be all bought out, I figured that I'd post 
> some photos of the Noritake CU24043-Y100 
> <https://www.noritake-elec.com/products/model?part=CU24043-Y100> display that 
> I also purchased on eBay <https://www.ebay.com/itm/326162809973> for $40 (no 
> relationship with seller)...  This is a smaller 20 x 4 char display that has 
> many built-in features including automatically expanding the chars x2 in 
> vertical, horizontal or both axis.  Easily driven by 3 pin RS232 serial (+5V, 
> GND, TXD), but I think it's RS232 and not TTL serial - so either use a MAX232 
> module or you can set FTDI adapters to invert TXD 
> <https://www.ftdichip.com/Support/Knowledgebase/index.html?ft232rdeviceoptions.htm>.
>    The software demonstrator makes it easy to figure out the serial escape 
> commands needed to enable the various functions.  It's smaller than the POS 
> display (about 3" wide x 1.2" tall) but still very legible, especially with 
> the large font options.  Just figured I'd toss this out there in case anyone 
> was interested...
> 
> <VFD_1.jpg>
> 
> <VFD_2.jpg>
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "neonixie-l" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to [email protected] 
> <mailto:[email protected]>.
> To view this discussion, visit 
> https://groups.google.com/d/msgid/neonixie-l/2b9b4ffd-b68c-4ac2-ba22-1302b6367351n%40googlegroups.com
>  
> <https://groups.google.com/d/msgid/neonixie-l/2b9b4ffd-b68c-4ac2-ba22-1302b6367351n%40googlegroups.com?utm_medium=email&utm_source=footer>.
> <VFD_1.jpg><VFD_2.jpg>

-- 
You received this message because you are subscribed to the Google Groups 
"neonixie-l" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion, visit 
https://groups.google.com/d/msgid/neonixie-l/CE3D12F8-5733-492A-8F9F-99BAE2097F7F%40gmail.com.

Reply via email to